What was the challenge or problem to solve?

On this occasion we addressed a Forensic Engineering project aimed at the analysis of failures in domestic hot water pipes. The pipelines, installed in a residential building a little more than 3 years ago, had suffered cracking and, therefore, multiple water leaks had occurred.

Specifically, the study had to determine whether the origin of the breakage was due to material failures and, therefore, was the responsibility of the supplier, or whether it was caused by misuse of the installation, for which the user would be responsible.

Failure analysis of domestic hot water pipelines Our investigations led to the conclusion that the material used in the pipes was not suitable for use with hot water. Currently, specific pipes are manufactured for cold water and others for hot water, both with different thermal requirements. The rapid deterioration of the pipes could be due to the fact that they were cold water pipes and therefore unsuitable for installation in a residential building.

Failure analysis of domestic hot water pipelines How was it addressed or what was the solution?

The study focused on the comparative analysis between pipes showing the failure and others in good condition. First, we performed a basic characterization of a damaged pipe and a new pipe of the same material. For this, we used FTIR (Fourier transform infrared transmission) spectroscopy. This test is used to locate differences in composition that could indicate a change in the material and, on the other hand, differences that would point to deterioration caused by external agents.

 

The next test consisted of differential scanning calorimetry (DSC), which measured the thermal properties of the plastic of a pipe installed 20 years ago without failure and one installed 3 years ago with failure. By means of this technique we analyzed the structural changes of the material in search of evidence of differences in its resistance. The results showed that the pipes with 20 years of use still retained their original properties, while those installed 3 years ago had requested their resistance to external agents.

Based on these investigations, a report with the results and conclusions of the study was prepared and presented to the client.

Failure analysis Forensic engineering
Plastics - polymers - composites

Tell us about your problem

Request a free initial consultation and speak with one of our experts

    Contact information


    When do you need to receive the quotation?


    What approximate investment do you expect for this service?


    When do you need to receive the results of the contracted service?


    Documents

    If you prefer, you can send us your documentation


    Allowed formats: PDF, DOC, XLS, PPT, JPG, PNG. Maximum size 10 MB total

    Or if your file is large, you can send it via a transfer platform and provide us with the link here:


    I agree with the  privacy policy.


    BASIC INFORMATION ON DATA PROTECTION:
    Responsible: INFINITIA RESEARCH, S.L. Purpose: to respond to queries raised by the user and send the requested information. Legitimation: user consent. Recipients: only transfers are made if there is a legal obligation. Rights: to access, rectify and delete, as well as other rights, as indicated in the Privacy Policy. You can find the complete information in our privacy policy