Requirements definition and product design specification
A product design specification is the document that sets out, in measurable and verifiable terms, everything a product has to meet before design work begins, and that the design team uses to make decisions and to check every solution.
Within our product development service, defining requirements is the first phase of design and innovation: we translate the brief, user needs, the market, available technology and manufacturing into specific design requirements, together with the criteria that will show whether each solution meets them.
A design that starts without clear requirements rests on preferences. Discussions between disciplines drag on, concepts cannot be compared and forgotten requirements surface in the prototype or the tooling, when changing a part means redoing the model, the molds and the tests.
Talk to a specialist
Request a free initial consultation; contact a consultant from our team of specialists
What is a product design specification?
What is it?

Product design specifications (PDS) are the set of technical, functional, aesthetic and usage requirements a product must meet, expressed in concrete and verifiable terms. They act as the technical contract between what is to be achieved and what will be designed, and give the team an objective criterion to choose between two geometries, rule out a component or decide whether a mechanism complies. Without them, every decision becomes a matter of preference and risk builds up until the prototype.
Their absence is the starting problem when a development begins with an idea or a commercial brief that has no technical definition. The initial brief is usually incomplete and mixed with solutions already in mind, such as asking for an aluminum part when what is needed is to carry a load at a given cost. Separating the problem from the solution widens the range of concepts and avoids closing the design before it has started. Specifications are not written in a meeting: they are derived from analyzing use, the market, technology and manufacturing.
A design specification records what the product must do and with what performance, under what conditions of use and environment, who will use it, within what limits of size, weight and cost, with which processes it will be manufactured and which regulations apply. Each requirement comes with the value or range it must achieve, its priority and the method that will be used to check it, so that anyone on the team can say whether a solution complies or not.
Defining design requirements at INFINITIA
We start by studying the available information and separating what is a real requirement from what is a preference open to discussion. That way we distinguish what is fixed, what is negotiable and what needs to be verified experimentally, and we identify the critical components where design effort should be concentrated.
We complete the requirements by analyzing existing solutions, which reveals demands that do not appear in the initial brief but that the market has already solved, as in the preliminary study and technical benchmarking for the design of a coupling, where that analysis set out what had to be solved before ideation.
When the product has several typologies or combines mechanics, electronics and interaction, we organize the study by area and write specifications for each typology, as in the development of an electronic product from an idea without specifications to industrialization. That way no aspect of the product is left without requirements.
We deliver the design specification as a common reference for the customer and the team. It is used to evaluate concepts, review the design and plan the prototype tests, and whoever continues the development or manufactures the product starts from the same criteria.
Benefits of defining requirements before design
Benefits
It allows solutions to be compared and discarded against objective criteria from the very first sketch. With measurable requirements, every concept is assessed against the same reference, discussions between disciplines are settled with data and the choice of the line of work reflects what the product has to meet.
It reduces redesigns in late phases. A requirement forgotten at the start later shows up as a mechanism that does not fit, a material that cannot withstand the temperature or a cost that does not add up, when fixing it means redoing models, molds and tests that were already closed. Detecting it in the specification costs a document review.
It brings order to development and decision-making. In the maturation of an idea protected by a utility model into a functional prototype, solving each defined technical challenge first and developing concepts afterwards ensured that no problem was left uncovered in the three concepts proposed.
It makes verification and handover easier. Each requirement has its own verification method, so prototype tests are planned from the start and the manufacturer or the team that continues the development receives clear criteria instead of interpretations of the design that depend on who reads it.

Types of requirements in a design specification
Types
A complete design specification covers every aspect that shapes the product: what it has to do, how it is used, where it operates, how it is made, what it costs and which regulations it meets. Leaving one out pushes the decision to the point where it is already expensive.
The weight of each type depends on the product. In a device with electronics and interaction, functional and usage requirements dominate; in a series-produced part, manufacturing and cost requirements do. All of them are expressed with values and verification methods.
Functional and performance requirements
Functional requirements describe what the product must do and with what performance: loads it withstands, travel, cycle times, power consumption, accuracy or capacity. They are written in terms of function rather than solution, with a target value and a tolerance, so that they can be met in more than one way. A vague requirement, such as asking for a part to be strong, is replaced by the load, the direction and the number of cycles it has to withstand.
They are the basis for comparing concepts and deciding what needs to be verified with a functional prototype. Those with the most technical uncertainty are identified early, because they are the ones that can force a change in the product architecture if they are not resolved at the start.
Usage, ergonomic and interaction requirements
Usage requirements define who will use the product and how: forces and reach, postures, assembly and disassembly sequence, readability of indicators and understanding of information. They are obtained by observing real use and analyzing tasks, with user studies as the main source when use affects safety or acceptance.
Including them in the specification avoids leaving ergonomics until the end, when the geometry is already closed. It also allows the user tests that will confirm the design meets them to be planned from the start. In products handled by different profiles, such as the installer and the everyday user, each profile contributes its own requirements.
Market and differentiation requirements
Market requirements record what the product has to offer compared with existing alternatives: minimum performance, target price, aesthetics and differentiating features. They are drawn from market research organized by area, such as aesthetics, typologies, mechanisms or interaction, to obtain conclusions that apply to the design rather than a generic picture of the sector.
Analyzing existing solutions also reveals how others have solved the same technical problems and which limitations they share. If every solution on the market shares the same constraint, it usually has a physical or production reason that should be included as a requirement. Each commercial solution is, in practice, a requirement already validated in real use.
Environmental requirements and service conditions
Service conditions describe where and how the product operates: temperature and humidity ranges, exposure to water, dust, radiation or chemicals, vibration, impacts, cleaning and transport. Each condition is quantified with the range and duration the product has to withstand, because material selection, sealing and design margins depend on it.
These are the requirements most often underestimated when design is done at the desk. Setting them with values makes it possible to select materials and processes on solid grounds and to define the durability and aging tests that will validate the prototype before industrialization. A poorly set temperature range can invalidate the choice of an entire material.
Manufacturing, assembly and cost requirements
Manufacturing requirements set the processes, volumes and target cost with which the product will be produced, and how it is assembled and maintained. They include constraints such as minimum wall thickness, draft angles, achievable tolerances or number of parts, which are applied during design for manufacturing so that the geometry is compatible with real production from the first model.
Defining them before design prevents an attractive concept from turning out to be impossible or too expensive to make, and allows the target cost to guide the choice of materials, processes and suppliers from the outset. They also set how many product variants must be planned and which parts they share.
Regulatory requirements and verification criteria
Regulatory requirements record the standards and regulations the product has to meet depending on its market and use, such as electrical safety, electromagnetic compatibility, food contact or CE marking. The specification states which standard applies to each requirement and how compliance will be demonstrated, without leaving that review for the approval phase.
| Requirement | Source | Verification |
|---|---|---|
| Functional | Brief and use | Functional test |
| Usage | User studies | User testing |
| Market | Benchmarking | Comparison |
| Environment | Service conditions | Environmental test |
| Manufacturing | Process and volume | Design review |
| Regulatory | Applicable standards | Test or documentation |
Every requirement in the specification, whatever its type, ends with its verification criterion: test, inspection, analysis or user testing. A requirement without a verification criterion cannot be declared either met or not met. The table summarizes where each type of requirement comes from and how it is checked.
Sectors where a design specification prevents late redesigns
Sectors
A design specification adds the most value where the product combines several disciplines or where a forgotten requirement forces molds, boards or certifications to be redone: electronics, consumer goods, healthcare devices, machinery, automotive and food.
In all of them, setting requirements with values and verification methods before design makes it possible to compare concepts, plan the tests and give the manufacturer an unambiguous design.
Product design specification in electronics: integration, power and temperature
In electrical and electronic products, the housing constrains the board, the board constrains the mechanisms and interaction constrains ergonomics, so a poorly defined requirement in one area affects all the others.
- Functions and power: performance, battery life and type of power supply expressed with measurable values and acceptable ranges.
- Integration: available space, heat dissipation and position of connectors, buttons and indicators on the housing.
- Regulations: electrical safety and electromagnetic compatibility identified from the start of the design.
A design specification for each typology sets the technical framework before components are chosen and allows mechanics and electronics to be developed in parallel without late incompatibilities between the board, the housing and the mechanisms.
Product design specification in consumer goods: everyday use, aesthetics and cost
In household appliances and consumer products, the design has to balance features, aesthetics, ease of use and a tight target cost, in a market with many alternatives.
- Everyday use: cleaning, maintenance and handling requirements for users with no technical training and no manual at hand.
- Differentiation: features, performance and aesthetics the product must offer compared with competing alternatives.
- Target cost: unit cost limit that determines materials, processes, number of parts and assembly.
Setting the target cost and usage requirements before design avoids attractive concepts that cannot be made at the market price or that users do not know how to use.
Product design specification in healthcare: documented design inputs
For medical devices, ISO 13485 requires design inputs to be determined, documented and reviewed, that is, the functional, performance, usability and safety requirements of the product.
- Intended use: users, clinical or home environment and conditions under which the device will be used.
- Safety: requirements derived from risk analysis and from reasonably foreseeable misuse.
- Verification: verification method associated with each requirement, which feeds into the product’s technical file.
A design specification with verifiable and traceable requirements serves as the basis for the technical file and for planning device verification from the first concept, without rebuilding the documentation at the end of development.
Product design specification in machinery: loads, environment and maintenance
In machinery and capital equipment, the design has to withstand demanding loads, cycles and environments for years, and allow assembly, adjustment and maintenance to be carried out safely.
- Loads and cycles: stresses, frequencies and service life expressed with values and safety margins.
- Environment: dust, humidity, vibration and operating temperature quantified for each area of the equipment.
- Maintenance: access, intervals and replacement of wear components planned in the design.
Defining service conditions and maintenance requirements before design avoids oversizing the equipment and anticipates the durability tests its validation will require before series production.
Product design specification in automotive: intensive use and validation
In automotive and mobility, components and accessories operate under vibration, temperature changes and intensive use cycles, and have to fit into assemblies with very limited space and weight, alongside suppliers who need clear requirements to quote.
- Integration: available space, interfaces with other systems, fastenings and maximum allowable weight.
- Durability: use cycles, vibration and temperature ranges the component must withstand throughout its service life.
- Validation: tests and acceptance criteria defined together with each requirement in the specification.
A design specification with acceptance criteria defined from the start shortens validation and reduces design changes after the first prototype tests.
Product design specification in food: contact, cleaning and use
In the food sector, equipment, utensils and packaging have to meet food contact requirements, withstand frequent cleaning and work for very different users and operators.
- Food contact: materials, coatings and finishes compatible with the regulations of the destination market.
- Cleaning: geometries without areas where residue builds up and resistance to cleaning products and cycles.
- Use: opening, dispensing and handling adapted to the end user and to the operator who prepares it.
Including hygiene and food contact requirements in the design specification avoids changing materials and geometries once the product is already being validated or the molds have been made.
The product design specification as the reference for the whole development
Value
A well-defined design specification translates an idea or a brief into criteria the team can verify. It establishes what will be designed before deciding how, brings order to the decisions of each phase and documents why the product has each shape, material and process.
The specification serves as the reference at every stage of development. Concepts are assessed against it, risks are identified from its requirements in the design risk analysis and prototype tests check that they are met. When the design raises a question, the answer is sought in the requirements rather than in the preferences of each discipline. That way the team, the customer and the manufacturer work from the same definition of what has to be achieved.
The savings come from moving decisions to the moment when they are cheap: a requirement corrected in the specification costs a meeting, while the same change on a mold or a board costs weeks. It is the first phase of the product design methodology, the one that expresses the brief as verifiable requirements before ideation. In regulated products, the specification and its verification are also part of the technical documentation submitted to market the product.
If you have an idea, a customer brief or a product you want to redesign and are not sure exactly what it has to meet, send us what you have: a description, sketches, reference products, conditions of use and the regulations you think apply. We will propose the scope and deliver the design specification for your product, ready to start ideation and design with clear criteria.

Frequently asked questions about the product design specification
FAQs
What should a design specification not include?
It should not include design solutions disguised as requirements, such as a specific material, shape or component, unless they are a real project constraint. A requirement describes what must be achieved and how it will be checked; how to achieve it is the job of design. Fixing the solution in the specification rules out alternatives that might have been better or cheaper.
Nor should it include vague intentions, such as easy to use or strong, without an associated value or verification method. Whatever cannot be checked ends up being argued over at the end of the project, when changing it is expensive and positions are already set. Each intention is rewritten as a value that can be measured.
What is the difference between a requirement and a specification?
A requirement expresses a need the product must meet, such as supporting a person’s weight or working outdoors. The specification translates it into measurable values and the way to check them: load, number of cycles, temperature range or required degree of protection. Two different specifications can meet the same need.
In practice, the design specification covers both levels: it starts from the needs of the user, the market and the business, and translates them into verifiable technical requirements the design team can use to decide between alternatives. Keeping both levels makes it possible to revise a specification without losing sight of the need behind it.
Can requirements be changed once design has started?
Yes. Prototypes, user tests or technical tests may reveal that a requirement was poorly framed or that one is missing, and correcting it in time is better than keeping a wrong requirement. The recommended approach is to record and justify the change and assess its effect on the design already done, on cost and on schedule.
What should be avoided are implicit changes, decided in a meeting that never reach the document. Over time they create different versions of the product in the mind of each discipline and redesigns nobody can explain. Recording every change in the specification avoids that problem.
When is the design specification defined in a project?
Before concepts are generated, once the brief, the user, the market and the technical constraints are understood. It is the bridge between the preliminary study of the idea and the ideation phase: without it, concepts cannot be compared against a common criterion and the choice depends on who presents them. In that sense, it is the first design decision of the project.
It is also worth reviewing when moving from concept to detailed design and before industrialization, because those are the moments when manufacturing, supplier and regulatory requirements are added with greater precision. Each review leaves the document more complete and closer to the real product.
How are requirements prioritized?
Mandatory requirements, which the product must meet to be valid, are distinguished from desirable ones, which add value but allow compromise. Priority is decided with the customer according to its effect on safety, function, cost and product differentiation. Legal and safety requirements are always mandatory.
Prioritization is the tool that resolves conflicts between requirements, such as higher performance versus lower cost. If it is decided before design, the team knows what to give up in each case without reopening the discussion at every design review or every meeting with the customer.
How is it checked that the design meets the specification?
Each requirement has an associated verification method: a test, a dimensional inspection, a calculation, a design review or a user test. During development, concepts and detailed design are reviewed against the specification, and the prototype is tested to check the requirements that can only be verified physically.
The result is a link between each requirement, the design solution that covers it and the test that proves compliance, useful for the customer, the manufacturer and, in regulated products, the technical file. If a requirement has no associated solution or test, the review detects it before manufacturing.
What happens if requirements depend on material properties that are not known?
Then they have to be measured. When a requirement depends on data that does not exist, such as the thermal conductivity of a material or its resistance to a chemical, tests provide the missing value. This is the approach of defining product requirements and specifications through testing, which complements the design specification.
In the specification, that requirement is flagged as pending experimental verification, so the design does not move forward on an assumed value. This avoids choosing a material or process that later fails under real conditions of use and forces the affected parts to be redesigned.
How does it differ from a preliminary study of the idea?
The preliminary study and idea maturation analyzes whether an idea has technical and market potential, identifies risks and sets out a roadmap. The design specification starts from an idea already considered viable and establishes, requirement by requirement, what the product has to meet.
In many projects they follow one another: the preliminary study decides whether the idea is worth developing and the design specification defines what will be designed. Both phases share the starting information, so no work is repeated. When the idea is already mature, it is possible to start directly with the specification, based on the information the customer already has.
How much does it cost to define a product design specification?
It depends on the complexity of the product, the number of disciplines involved, the information available at the start and whether it needs to be completed with market research, user studies or tests. A simple mechanical product with prior information costs less than a device with electronics, interaction and specific regulations. The specification for a variant of an existing product is the quickest to define.
To give you a firm figure, we need to know the product, its use and the information you have. Send us that information and we will prepare a proposal with the scope, the planned activities and the timeline for each phase, so you know what you will receive and when.
How long does it take to get the design specification?
Typical lead times range from one to four weeks depending on the complexity of the product and the starting information. A specification for a redesign with clear references is faster than one for a new product that requires prior market research or user studies. The timeline depends mainly on the information already available and on how many people need to approve the requirements.
If you need the specification by a specific date, such as the start of design, a quote to a customer or a meeting with a manufacturer, let us know from the start. We will use it to plan which parts are closed first and which can be completed in parallel with the design without delaying the project.
What do I need to send to get started?
Send us whatever you have: a description of the idea or the brief, sketches, reference or competitor products, the current product if it is a redesign and any requirement already known. Add who will use it, where and under what conditions, and if there are complaints or returns for the current product, include them too.
Also tell us the expected production volume, the target cost if you have one and the markets where it will be sold, because they determine the manufacturing requirements and the applicable regulations. With that information we will propose the scope and confirm timeline and budget. If any requirements are confidential, let us know so we can handle them with the necessary discretion.
Why does a product that meets what was asked for not satisfy the customer?
Because what was asked for was not what was needed. When the brief is accepted as it comes, without translating it into verifiable requirements, each party understands something different, and the product ends up meeting the letter of the order but not its intent or the real conditions of use.
If this happens to you, start by rebuilding the specification from real use and from what the customer expected, and compare it with the current design. The differences show which requirements were missing or poorly framed, and guide a redesign that can be verified with the customer before manufacturing again.
